Before buying a smart toilet for our bathroom, we must know what the installation conditions of the smart toilet are.
Power socket: ordinary household three pin socket is OK. Remember to reserve the socket during decoration, otherwise you can only use the open line, which has potential safety hazards and is not beautiful at the same time.
Angle valve (water inlet): it is best not to put it directly behind the toilet to avoid being pushed by the toilet. At that time, the toilet can only be installed seven or eight centimeters away from the wall. The space is too small to install. It can be placed on the side. It is also convenient to close the water valve when going out for a long trip.
Pit distance: that is, the distance from the center point of the sewage outlet to the wall tiles. You can directly ask the property for door-to-door measurement service. The intelligent toilet is divided into 305 and 400 pit distances. If it is lower than 390mm, use 305. You must pay attention to this, otherwise you can’t install it.
Space reservation: when buying a toilet, remember the overall volume of the toilet and be optimistic about the overall width of the reserved toilet, especially if there is a shower or washstand next to it. Pay attention to how much space is left on the seat. It’s not good if it’s too wide, and it’s more uncomfortable if it’s too narrow.
Water pressure: most toilets on the market are limited by water pressure. In terms of product parameters, when buying intelligent toilets, you must first pay attention to the water pressure at home. Most intelligent toilets are designed without water tank, which has obvious advantages. For example, they don’t need to be used for a long time, and they don’t have to worry about water pollution and deterioration in the water tank. However, the disadvantages of no water tank design are also obvious, and there are certain requirements for water pressure. If it is a low water pressure environment, the flushing effect is not ideal, and it is more likely that it will not be used. Although most of the intelligent toilets are designed according to the water pressure of the municipal pipe network, the water pressure is small due to the pipe laying in the subsequent decoration, and the unreasonable pipeline design in some old communities often leads to insufficient water pressure, resulting in the problem that the intelligent toilet cannot be used after installation. Ordinary intelligent toilet without water tank needs a water pressure of 0.15Mpa ~ 0.75mpa, so it cannot be used if the water pressure is insufficient. Can’t you use the smart toilet with low water pressure? Don’t worry, there is another simple way, that is to choose the intelligent toilet without water pressure limit.
Socket: before installation, the installation position of the intelligent toilet shall be planned, and the socket shall be reserved at the side and rear of the planned position. Note that the socket should not be directly behind the toilet, because it will withstand the toilet and can not be installed. If it is not reserved, it can only take the open line, which is not beautiful and the work quantity is larger.
Drainage method: know whether the sewage outlet of the toilet is on the ground or on the wall. On the ground, select the ground row intelligent toilet, and on the wall, select the wall row intelligent toilet.
Dry and wet separation: after all, it is a household appliance. It is best to separate dry and wet between the shower and the toilet. Be sure to choose an intelligent toilet with good waterproof and anti – electricity
About smart toilet types:
Siphon or direct impact:
The siphon type is selected. With the help of the suction of water, it is cleaner than direct flushing, which can avoid causing great flushing noise and prevent odor.
Thermal storage or instant:
Select the instant heating type, and the heat storage type water will be heated repeatedly in the water tank, which consumes electricity and energy, and will retain dirt after a long time.
Floor type or wall type:
Look at the location of the blowdown pipe. If the blowdown pipe is on the ground, select the floor type. If the blowdown pipe is on the wall, select the wall type.
With or without water tank:
Watch the water pressure at home. If it is a family with low water pressure, we generally recommend wearing a water tank (except the intelligent toilet without water pressure). If the water pressure is strong enough, use the hot type without water tank.
Built in filter:
It is better to use both built-in net and external filter. The built-in net can only filter sediment, and the hole on it will become larger with the increase of cleaning times. The filter can filter harmful substances such as insect eggs, red insects and sediment, and the filtering effect is very good.
Stainless steel nozzle or plastic nozzle:
Choose stainless steel, plastic material is easy to aging and yellowing, affecting the service life of the toilet
Post time: Dec-21-2021