Constant temperature shower can maintain constant temperature, which is related to its unique structure. The hot water flows out of the water heater and meets the cold water before reaching the faucet shower. The water temperature depends on the mixing degree of cold and hot water. No matter whether the common shower is mixed well or not, we will open the door and release it. Therefore, we need to try and adjust the water temperature ourselves. The constant temperature shower will not be released until the water temperature is mixed well, so the water can be washed directly. The fundamental reason is that there are more thermal elements in the constant temperature shower than in the ordinary shower.
This kind of element is generally made of paraffin or nitinol alloy, and its shape will change according to the change of temperature. (thermal expansion and cold contraction) for example, for the temperature sensing element made of paraffin, when the water temperature changes, the volume of paraffin changes, and then the spring drives the piston through the sensing plate at the container mouth to adjust the mixing ratio of cold and hot water, balance the water pressure and achieve the effect of constant temperature water outlet.
There are the following precautions for daily using constant temperature shower:
1. Experienced professionals shall be invited for construction and installation. During installation, the shower shall not collide with hard objects as far as possible, and do not leave cement and glue on the surface, so as not to damage the gloss of the surface coating. Pay special attention to remove the sundries in the pipe before installation, otherwise the shower will be blocked by the sundries in the pipe, thus affecting the use. When the water pressure is not lower than 0.02MPa (i.e. 0.2kgf/cm3), if the water output decreases or even the water heater stalls after use for a period of time, gently unscrew the screen cover at the water outlet of the shower to remove impurities, which can generally be restored as before. But remember not to forcibly disassemble the shower, because the internal structure of the shower is complex and non professional.
2. When the water pressure is not lower than 0.02MPa, after using for a period of time, it may be found that the water output decreases or even the water heater stalls. At this time, gently unscrew the screen cover on the water outlet of the shower to remove the impurities inside.
3. When opening and closing the shower faucet and adjusting the water outlet mode of the shower, do not use too much force, but turn it gently according to the trend.
4. Do not use too much force when opening and closing the shower faucet and adjusting the water outlet mode of the shower, and turn it gently according to the trend. Even the traditional faucet does not need to spend much effort. Pay special attention not to support or use the faucet handle and shower support as handrails. The metal hose of the shower head of the bathtub should be kept in a natural stretch state. Do not coil it on the faucet when not in use. At the same time, pay attention not to form a dead angle at the joint between the hose and the faucet, so as not to break or damage the hose.
Post time: Oct-03-2021