Showers are familiar to everyone, but few people may have heard of pressurized showers. As the name suggests, pressurized shower is a shower with enhanced water pressure effect. It is a kind of shower invented to solve the phenomenon that the water outlet of the shower is cold and hot due to insufficient water pressure in some users’ homes.
We should all know the hose for showers. If we want the water to shoot far and fast, we will pinch the opening of the hose, so that the water will shoot farther under the same conditions. Therefore, the outlet aperture of pressurized sprinkler on the market is generally very small. Most of them can be less than 0.5mm, which is about the size of a needle eye. In contrast, when the aperture decreases, the number of holes increases. Therefore, under the same conditions, the water column emitted by the pressurized shower is very small and dense, and the water flow is very soft on the body, which is very comfortable. In addition to changing the aperture, the interior of the shower will also be optimized. The biggest difference between the pressurized shower and the ordinary shower is whether it has the effect of pressurization. At present, most of the pressurized shower on the market are designed based on the same principle. The specific working principle of the pressurized shower is that an energy-saving pressurized water inlet device is installed at the tail of the shower head and connected with the venturi hole of the shower handle. When the water flows into the shower, the external air pressure forces the water to speed up and water out, So as to increase the water outlet speed by about 30% and achieve the effect of automatic pressurization by 30%. To sum up, it is to promote the mixing of air and water flow, increase the internal pressure of water flow, and form a high-speed water and air flow.
Four key points for the purchase of pressurized shower:
1. Water saving function
Water saving function is the key point to be considered when purchasing sprinkler. Some sprinklers adopt steel ball valve core and equipped with regulating hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This kind of shower with reasonable design saves 50% water than ordinary sprinkler. When selecting, let the shower tilt the water. If the water from the spray hole on the top is obviously small or not at all, it indicates that the internal design of the shower is very general. Even if there are many water outlet methods such as lasing and spraying, the user may not get the corresponding comfortable experience.
2. Is the nozzle easy to clean?
The blockage of the water outlet of the shower is often caused by the accumulation of impurities in the screen cover. It is inevitable that there will be scale deposition after the shower is used for a long time. If it cannot be cleaned, some spray holes may be blocked. In order to avoid the blockage of the water outlet due to poor water quality, the well-designed shower head is often prominent outside for easy cleaning, or the shower head is made of silica gel, When cleaning, the scale deposited on the nozzle can be brushed off with a rag or hand. Some sprinklers are also equipped with the function of automatically removing scale. You can ask more about it when purchasing sprinklers.
3. Look at the coating and spool.
Generally speaking, the brighter and more delicate the surface of shower head, the better the process treatment of the coating. A good valve core is made of high hardness ceramics, which is smooth and wear-resistant, and prevents running, emitting, dripping and leaking. Consumers must twist the switch to try it. If the feel is poor, do not buy this kind of shower.
4. Use comfort
For example, whether the water pipe and lifting rod are flexible, how about the bending resistance of sprinkler hose and steel wire, whether the shower connection is equipped with anti twist ball bearing, whether the lifting rod is equipped with rotary controller, etc.
Post time: Nov-01-2021