Everyone is familiar with the shower, but the supercharged shower may be heard by few people. As the name suggests, a pressurized shower head is a shower head with the effect of enhancing water pressure. It is a shower head invented to solve the phenomenon that the water from the shower is hot and cold due to insufficient water pressure in some users’ homes.
We should all know the hose that sprinkles the water. If we want the water to shoot far and fast, we will pinch the opening of the hose, so that the water will shoot farther under the same conditions. Therefore, the aperture of the water outlet of the pressurized showers on the market is generally made very small, and most of them can be made below 0.5mm, which is about the size of a pinhole. On the contrary, the hole diameter is reduced, and the number of holes is also increased, so under the same conditions, the water column shot by the booster shower is very small and dense, and the water flow is also very soft on the body, which is very comfortable. . In addition to changing the aperture, the interior of the shower will also do some optimized designs. The biggest difference between a supercharged showerhead and an ordinary showerhead is whether it has the effect of supercharging. At present, most of the supercharged showerheads on the market are designed with the same principle. The specific working principle of the supercharged showerhead is: An energy-saving pressurized water inlet device is installed at the tail of the shower head and communicated with the venturi hole of the shower handle. When the water flow enters the shower head, the external air pressure forces the water flow to speed up the water flow, thereby increasing the water outlet speed by about 30%, which can be used for automatic pressurization of 30%. %Effect. In a nutshell, it is to promote the mixing of air and water flow, increase the internal pressure of the water flow, and form a high-speed water flow.
Four main points for the purchase of a pressurized shower:
1. Water-saving function of water outlet Water-
saving function is the key point to be considered when purchasing a shower. Some showers use a steel ball valve core and are equipped with an adjustable hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This type of shower with a more reasonable design saves 50% of water than ordinary showers. When selecting, let the shower head tilt the water out. If the spray hole at the top is obviously small or not at all, it means that the internal design of the shower head is very general. Cozy experience.
2. Is the nozzle easy to clean?
The blockage of the water outlet of the shower is often caused by the accumulation of impurities in the screen cover. After the shower is used for a long time, scale will inevitably deposit. If it cannot be cleaned, some nozzle holes may be blocked. When the nozzle is blocked, the well-designed shower nozzles often protrude out, which is easy to clean, or the nozzles are made of silicone material, and the scale deposited on the nozzles can be wiped off with a rag or hand when cleaning. Some showers are also set to automatically remove scale, so you can ask more questions about this when purchasing a shower.
3. Look at the coating and valve core.
Generally speaking, the brighter and more delicate the shower surface, the better the coating process. A good valve core is made of ceramics with extremely high hardness, which is smooth and wear-resistant, and prevents leakage and leakage. Consumers must try to twist the switch by themselves.
4. Use comfort,
such as whether the water pipe and lifting rod are flexible, what is the buckling resistance of the shower hose and steel wire, whether there is a ball bearing to prevent twisting at the joint of the shower, whether there is a rotary controller on the lifting rod, etc.
Post time: Dec-07-2022