1. When it comes to zero water pressure smart toilets, common misunderstandings and misunderstandings are:
1. Zero water pressure limit ≠ water pressure 0 can be used.
Most of these are gimmicks, in fact, it is also in the range of 0.08MPa-0.75Mpa Within the value, it is no different from other smart toilets that claim to have no water pressure limit.
2. Thermal storage smart toilet = smart toilet with water tank The general situation is like this, but smart toilet with water tank ≠ thermal storage smart toilet, it may also be instant thermal type, but it is not possible to find thermal storage type on the market. easy.
What is the standard water pressure used in the industry, and how does it count as the need for water pressure boosting?
Generally speaking, the standard currently used in the industry is 0.15-1.75MPa, that is, >10 seconds of 3L water, but in fact the former is for the purpose of to serve.
To put it simply:
0.15-1.75MPa≠10 seconds 3L water, which means that the water pressure and water flow are not necessarily equal before.
The water pressure is high and the water flow is low, that is, the pressure of the air inside the pipe is reached. This situation has a certain relationship with the pre-filter in the home.
There will also be cases where the water pressure is insufficient, but the water flow is sufficient for 10 seconds of 3L water. This situation is generally because the diameter of the pipe at home is large, but the pipe elbow connected to the angle valve at the outlet is converted by size and size. Adapter elbow.
That is to say, if the water in the home is less than 3L in 10 seconds, it can be regarded as low water pressure. At this time, it is necessary to find a smart toilet corresponding to the low water pressure. . . .
Now many of them are slowly starting to be 2.5L/10S. It is the progress of the times, and the intensity of water pressure requirements will become less and less. Pay attention to this point, we need to consider the water pressure in advance The problem.
4. Booster pump installation environment
Under normal circumstances, the water pressure at home is not enough. The master will suggest you to do this when you come to the door. After you buy a toilet and go back, the master also comes to the door. It is very troublesome to return. Home improvement booster pump. This booster pump is very small, you can play wherever you like, it won’t take up much space, and the toilet can be completely covered.
5. At present, the main flushing methods of the first-line brands of domestic smart toilets are straight-flushing and water pressure-free flushing. The main selling points of these two flushing methods are different. Flush away, and the impulse is large, but there are certain requirements for the water pressure at home, and the reason for the high impulse is higher noise. The emergence of the water pressure flushing technology is because the normal use of most smart toilets in the past has a great impact on the water pressure. High requirements, in the peak period of daily water use and when most of the homes are now installed with a whole-house water purification system, the water flow will be greatly reduced, and the water pressure will not meet the water supply requirements. In this case, many smart toilets cannot be used normally. The water pressure flushing technology perfectly solves these pain points. Most water pressures as low as 0.02Mpa can also achieve normal flushing, and the flushing is faster and quieter. This is the advantage of the water pressure free flushing technology. , old-fashioned houses, whole-house water purification and other problems where the peak water pressure of water supply cannot meet the requirements,
and the water pressure siphon smart toilet is not recommended for displacement. The displacement of the toilet directly affects the future blockage, even if It is
recommended to use a wall-mounted smart toilet or a wall-mounted ordinary toilet + a smart toilet cover. The former is more expensive, and the latter is not much different from the price of most smart toilets on the market, so it will be very effective. To solve the displacement problem, most of the wall-mounted toilets are straight flush and have a large flushing force, and the water tank is hidden in the wall with good mute effect, and it is not easy to block.
Post time: Nov-21-2022