How To Improve The Water Pressure Of Shower Head?

If the water pressure of shower head in our home is slow and not strong, at this time, we should think of ways to improve the water pressure of the shower nozzle, so that we won’t feel upset and wash very clean. Then let’s introduce how to improve the water pressure of shower head

The methods to increase the water pressure of shower nozzle are as follows:

1. Replace pressurized shower nozzle

The pressurized shower will be pressurized before the cold and hot water enters the mixing valve, so as to maximize the water temperature and water output of the shower, and there will be no sudden cold and hot phenomenon. Moreover, the pressurized shower is also a function of limited flow. At this time, the water inlet area can only be adjusted according to the water pressure, so as to achieve a balance of water volume, pressurize and save water.

2. Hydraulic booster pump

If the water pressure is very low, then this problem can not be solved only by boosting the shower. It is necessary to install a water pressure booster pump. It can be said that its purpose is to pressurize the water heater, bath, high-rise room when the water pressure is not enough, solar automatic pressurization and other occasions.

3.Dredge nozzle

Pierce the small hole full of scale with a sharp object, and then clean it. When there is no scale in the small hole, the water from the shower will be normal.

If it is seriously blocked by scale, directly remove the shower and soak it, and then carefully clean it.

It’s also good to remove the scale with acidic substances. You can use rice vinegar and vinegar. Mix their water and vinegar according to the ratio of 1:1, and then soak the flower sprinkler in the solution. After soaking in it for almost a few hours, its scale can be removed.

In order to ensure the water pressure of the shower head, we should pay attention to maintenance at ordinary times. Maintenance methods include:

1. Generally, the environment of bath room should not exceed 70 ℃. Otherwise, due to high temperature or long-term ultraviolet radiation, the bath head will accelerate aging and shorten its service life. When installing the shower head, try to stay away from the electric heat source, such as Yuba. If you have to install Yuba above the shower head, the distance should be controlled above 60cm.

2. When using the shower head at ordinary times, it should be handled with care, and the hose should be kept in a natural extension state. When not in use, do not roll it on the faucet. Pay attention to the connection between the hose and the faucet, and do not form a dead corner to avoid damaging the hose.

It is best to wash the shower head every half a month or less. Generally, take down the shower and put it into a small basin. Then add an appropriate amount of white vinegar to the water. Soak for 4-6 hours. Then rinse the bathing surface with water and dry it with cotton cloth. White vinegar can not only remove the scale in the shower head, but also play a certain disinfection and sterilization effect.