The smart toilet cover not only has various functions, but also has a good decorative effect, so it is favored by the majority of consumers. However, we should also pay attention to some problems before buying the smart toilet cover.
Before purchasing a smart toilet cover, you should pay attention to:
1. Determine the size of the toilet. The size of the intelligent toilet cover should be completely matched with the toilet before installation. Whether the size of the toilet conforms to the installation mainly depends on the diameter distance from the water tank to the toilet, the distance from the installation hole to the inner ring of the toilet, the distance between the installation holes, and the distance from the water tank to the installation hole. Generally speaking, the distance from the water tank wall to the front end of the toilet should be at least 49 cm.
2. Determine the shape of the toilet. At present, the mainstream toilets in the market are roughly divided into two types: V-type and U-type. If you buy them wrong, they cannot be installed. Migou intelligent toilet cover has launched corresponding models for the two shapes, which can adapt to 99% of domestic toilets.
3. Determine the reserved power supply and location. The intelligent toilet cover is an electronic product. The toilet needs to be equipped with a three plug power supply. If there is no power supply near the toilet, wiring or professional transformation is required.
4. It is determined that there is a reserved water path. The intelligent toilet cover needs to be connected with a tap water pipe to complete the flushing function. The water sprayed from it is the tap water you usually use at home. It is supplied independently through a three-way valve.
When selecting the smart toilet, consumers should pay special attention to the following basic functions:
1. whether there is a built-in booster pump If there is no built-in booster pump when the intelligent toilet is used at a high level, it is likely that the water flushing is not effective due to insufficient water pressure.
2. whether there is an integrated pre filter The pre filter can filter out the sediment and other impurities in the water.
3.. The spray gun has self-cleaning function and sterilization function. These two functions are also particularly important. In addition to convenience and technology, the most important thing that the intelligent toilet brings to our life is health. The self-cleaning and sterilization functions of the spray gun can inhibit the breeding of bacteria in the intelligent toilet to the greatest extent, and greatly protect the health of users.
4. instant heating Intelligent toilet must choose instant heating type. Some respondents say that the thermal storage type can also be used. Don’t believe it. The heat storage type water is stored in the water tank, and bacteria will certainly breed if stored for a long time. We buy the smart toilet to a large extent for health. If we choose the heat storage type, it is not conducive to health.
5. safety against water and electricity leakage.
The interior of the smart toilet is powered on, while some consumer toilets are not separated by dry and wet separation, so the toilet may be flooded during shower. If there is no leakage proof motor protection, there is a great potential safety hazard.
At the same time, pay attention to the maintenance of the intelligent toilet cover:
1. The intelligent toilet cover belongs to a household appliance, which contains precise electronic components. Therefore, before cleaning, the power must be turned off. After confirming that the power indicator on the control board is turned off, the cleaning can be started.
2. Although the smart toilet cover on the market says it has waterproof function, it is an electronic product after all. It is difficult to ensure that the water will not flow into the product and cause damage to the motherboard by directly washing it with water. Moreover, the bathroom is a humid space. The installation of smart toilet is best separated from the shower. The dry wet separation can improve the service life of the intelligent toilet.
3. The bathroom is relatively humid, so the dust will be relatively small. You can wipe it with soft cotton cloth for daily cleaning. If it is really dirty, you can wipe it with neutral detergent. Do not scratch it with sharp objects, which will easily leave scratches and affect the appearance.
4. It is difficult to clean the seat ring base and gap. The gap between the cover plate and the toilet can not be wiped by lifting the seat ring. If your home is an integrated intelligent toilet, it still needs a little technology to remove it. It is recommended that it be disassembled and assembled by professionals. If it is a split intelligent cover plate, it is easier to remove and clean it. The one button disassembly and assembly of the intelligent cover plate only needs a slight press, a lift and a pull to remove it, Wipe with soft cotton cloth and install it after air drying.
Post time: Jul-06-2022