Let’s take a look at the functional structure of the faucet, which can be roughly divided into four parts: water outlet part, control part, fixed part and water inlet part The structural principle of most faucets is as follows: first, the inlet part connects the water from the water pipe to the control part. We adjust the size and temperature of the water through the control part, and the adjusted water flows out through the outlet part for our use. The fixed part is used to fix the faucet, that is, fix the faucet in a certain position to prevent it from shaking.
1. Water outlet part: there are many kinds of water outlet part, including ordinary water outlet, water outlet with elbow that can rotate, pull-out water outlet, water outlet that can rise and fall, etc. The design of the outlet part first considers practicability, and then considers beauty. For example, for the vegetable washing basin with double grooves, the swivel with elbow should be selected, because it is necessary to often rotate and discharge water between the two grooves. For example, the design with lifting pipe and pulling head is to consider that some people are used to washing their hair on the washbasin. When washing their hair, they can pull up the lifting pipe to wash their hair.
When buying faucets, we should pay attention to the size of the water outlet part. We met some consumers before. They installed a large faucet on a small washbasin. As a result, the water sprayed to the edge of the basin when the water pressure was slightly higher. Some installed basins under the stage. The opening of the faucet was slightly far away from the basin. Choosing a small faucet, the water outlet could not reach the center of the basin, It’s not convenient to wash your hands.
2. Bubbler: there is a key accessory in the water outlet part called bubbler, which is installed at the water outlet of the faucet. There are multi-layer honeycomb filter screens inside the bubbler. The flowing water will become bubbles after passing through the bubbler, and the water will not sputter. If the water pressure is relatively high, it will make a wheezing sound after passing through the bubbler. In addition to the effect of collecting water, the bubbler also has a certain water-saving effect. The bubbler hinders the flow of water to a certain extent, resulting in a reduction in the flow within the same time and saving some water. In addition, because the bubbler does not sputter the water, the utilization rate of the same amount of water is higher.
When purchasing faucets, you should pay attention to whether the bubbler is easy to disassemble. For many cheap faucets, the bubbler shell is plastic, and the thread will break once it is disassembled and can not be used, or some will simply stick to it with glue, and some are iron, and the thread will rust and stick after a long time, which is not easy to disassemble and clean. You should choose copper as the shell, I’m not afraid of disassembly and cleaning for many times. The water quality in most parts of China is poor and the water contains high impurities. Especially when the water supply plant stops water for a period of time, the water flows out in yellowish brown when the tap is turned on, which is easy to cause the bubbler to be blocked. After the bubbler is blocked, the water will be very small. At this time, we need to remove the bubbler, clean it with a toothbrush and then install it back.
Post time: Jan-26-2022