Faucets are frequently used bathroom accessories at home. A family at least has two or three faucets for different life needs. Although the faucet is not expensive, it can be used for a longer time if you pay attention to some details and take good care of it. In this way, it also saves the trouble of frequently changing the faucet. What are the faucet cleaning techniques? How can you effectively maintain the faucet? Take a look at the relevant content below!
Precautions for faucet maintenance
1. When the gas temperature is below zero, if the handle of the faucet is abnormal, you must spray the sanitary products with hot water until you feel normal, then the faucet will be affected. Service life of valve element.
2. Water dripping will occur after the faucet is closed, because there is a water shed in the cavity after the faucet is closed, which is a normal phenomenon. If the water drips for more than ten minutes, it will leak, indicating that the product has quality problems.
3. Because the water contains a small amount of carbonic acid, it is easy to form scale on the metal surface, corrode the surface of the faucet, and affect the cleaning and service life of the faucet. Therefore, always use a soft cotton cloth or neutral soap sponge to wipe the surface of the faucet. Note: Do not use corrosive or acidic substances to wipe Then dry the surface with a soft cloth. Avoid using wire clusters or cleaning cloths and hard particles. In addition, do not hit the nozzle surface with hard objects.
4. Do not use excessive force on the faucet and turn it gently. Even traditional faucets do not require much effort to tighten them. In particular, do not use the handle as a handrail to support or use it. Many people are used to turning off the tap after using it. This is not desirable. This can not only prevent water leakage, but also damage the sealing valve, causing the tap to weaken.
5. The water flow decreases and impurities are removed. When the water pressure is not less than 0.02 mpa, if the water volume is reduced, it may be blocked inside the faucet. The solution is to gently unscrew the nozzle screen cover at the faucet outlet with a wrench, carefully clean the impurities, and then carefully install it.
Post time: Nov-02-2022