The Shower column is a connector connecting the shower head, and the shape is a tube or a rectangular parallelepiped. Generally, it is more common to look like an irregular cuboid. It supports the shower head and is an internal channel for holding water. When in use, when the shower switch is turned on, the water can reach the shower head from the shower column.
. Mainly includes the top shower at the top of the shower column, more than one fixed pinhole small shower set in the middle of the shower column and knobs for adjusting the water temperature and water flow, and a hand shower, the shower column is provided with a hand shower to adjust the installation height. fixed guide groove. The fixed guide groove is arranged on the side of the shower column and beside the decorative surface, and its section is T-shaped or C-shaped. A decorative panel is arranged on the front of the shower column, and a decorative surface is arranged on the side of the shower column.
How to choose the Shower column
1. Touch the material and
the material determines the quality. You can touch the shower column to feel the material and feel of the surface, and you can also check whether the seal of the shower column is smooth and whether there are cracks in the connection. These are the places that need attention. . Plastic materials, the current engineering plastics have good performance, strength and heat resistance. Plastic material has the advantage of being affordable, but its disadvantage is that it is easily deformed by heat. The stainless steel material has the advantages of wear resistance, no rust, and affordable price. The advantages of aluminum alloy and aluminum-magnesium alloy are that they are not afraid of wear and tear, and are lightweight and durable. The disadvantage is that it may become black after a long time. The price of copper is more expensive than that of stainless steel, and the product positioning is higher than that of stainless steel.
2. Height selection
Generally, the standard height of the shower column is 2.2m, which can be determined according to personal height when purchasing. Under normal circumstances, the faucet is 70~80cm from the ground, the height of the lifting rod is 60~120cm, the length of the joint between the faucet and the shower column is 10~20cm, and the height of the shower from the ground is 1.7~2.2m. Consumers should fully consider the bathroom space when purchasing. size.
3. Inspection of detailed accessories
Pay more attention to accessories. You can see whether there are holes or cracks in the joints. If there are trachoma, water will seep after passing through the water, and serious fractures will occur.
4. Check the effect of the shower column
Before buying, ask what water pressure is required for the product, otherwise it will not work after installing a shower column. You can check the water pressure first, and if the water pressure is insufficient, you can install a pressurized motor.
When installing the Shower column, pay attention to the following items:
1. The height of the hot and cold water pipes of the Shower column should be 85 cm to 1 meter above the ground. If the height of the shower column cannot be lifted, it must be kept above 1.1.
2. The national standard for the distance between the cold water pipe and the hot water pipe is 15 cm, and a tolerance of 2 is allowed. However, if adjustment is required, both sides must be adjusted at the same time and the same height must be maintained. , The connection nut is cracked or even the body is cracked.
3. Before installing the shower column: the water valve must be opened to flush out the debris in the water pipe.
4. Note that all the nut joints need to be padded with the original rubber gasket, otherwise it will easily cause water leakage.
5. The faucet and shower column should be arranged to be installed at the end as far as possible, so as to avoid unnecessary surface damage during the decoration.
Post time: Sep-28-2022