The concealed faucet is to bury the water supply pipe in the wall, and directly guide the water to the washbasin or sink located below through the in-wall faucet on the wall. The faucet is independent, and the sink is also independent. The washbasin or sink does not need to be considered to be combined with the interior of the faucet, so there are more free choices in modeling, allowing more diverse choices for different spaces and environments.
The junction of the washbasin or sink and the faucet is usually the place where rust and bacteria grow the most, and the separate faucet and washbasin or sink do not have to worry about the cleaning of these positions.
Two forms of in-wall faucets.
1. Single control mode: A single switch can be turned left and right to control hot and cold water, and moved up and down to control the water output, which will save water.
(1) Conjoined hidden faucet with single control water mixing valve.
(2) Separate hidden faucet with single control water mixing valve.
(3) Hidden faucet with single control water mixing valve with embedded box: This kind of embedded box not only has a cover plate in appearance, but also has a different internal structure. There will be a level in the embedded box. When pre-embedding, the entire yellow box should be pre-buried into the wall.
2. Sub-control form: The sub-control water valve has a hidden faucet, which means that the hot and cold water are controlled separately, with the left hot and the right cold, and the water outlet in the middle.
Double switch, hot and cold water should be adjusted separately, the water flow is large in the process of adjusting to the appropriate water temperature, which is not very water-saving. If only hot water is turned on, it is easy to burn, not suitable for the elderly and children, but decorative Sex will be stronger.
2.Advantages and disadvantages of in-wall faucets:
1. Save space, using in-wall faucets generally saves space and frees up countertop space.
2. Easy to clean, there is no sanitary dead corner, and cleaning is more convenient.
3. It is highly decorative, which can improve the decorativeness of the space and make the space more tidy.
Disadvantages:
1. The price is more expensive, and the price and installation cost of the in-wall faucet are higher than those of ordinary faucets.
2. The installation is troublesome, and you need to ask a professional installer to install it.
3. Maintenance is troublesome. Many parts are pre-buried in the wall, so once there is a problem, maintenance is more troublesome.
3. Precautions for installation of wall-mounted faucets.
1. Due to the concealed installation, the wall-mounted faucet must be pre-buried together with the water pipe when it is used for hydropower. Therefore, it is necessary to purchase the faucet style in advance before doing hydropower.
2. Do not take off the protective cover of the product during the construction process, so as not to damage the product.
3. Be sure to pressurize the product to test whether there is water leakage and whether the water pipe connection is correct.
4. Before installation, the debris at the connection must be removed to avoid blockage or water leakage.
5. The installation height is best controlled at a height of 15~20cm above the basin/sink, and a height of 95cm~100cm from the ground.
6. If there is no problem, then proceed with the process of tiling.
Post time: Dec-02-2022